[R] two questions for R beginners

Wed Mar 3 19:15:55 CET 2010

If R made
   matrix$columnName
mean the same as
   matrix[, "columnName"]
(a vector) so matrices looked more like data.frames,
would we also want the following to work
as they do with data.frames?
   with(matrix, log(columnName)) # log of that column as a vector
   matrix["columnName"] # 1-column matrix
   matrix[["columnName"]] # vector equivalent of that 1-column matrix 
   lm(responseColumn~predictorColumn, data=matrix)
   eval(quote(columnName), envir=matrix)
The last 2 bump into the rule allowing envir to be
a frame number (since a 1x1 matrix is currently taken
as the frame number now).

Perhaps the print methods for data.frame and matrix
should announce the class of the object being printed.

Bill Dunlap
Spotfire, TIBCO Software
wdunlap tibco.com  

> -----Original Message-----
> From: r-help-bounces at r-project.org 
> [mailto:r-help-bounces at r-project.org] On Behalf Of Patrick Burns
> Sent: Wednesday, March 03, 2010 2:44 AM
> To: r-help at r-project.org
> Subject: Re: [R] two questions for R beginners
> 
> I think Duncan's example of a list that is
> a matrix is a compelling argument not to do
> the change.
> 
> A matrix that is a list with both names and
> dimnames *is* probably rare (but certainly
> imaginable).  A matrix that is a list is not
> so rare, and the proposed double meaning of
> '$' would certainly be confusing in that case.
> 
> Pat
> 
> 
> On 02/03/2010 17:55, Duncan Murdoch wrote:
> > On 02/03/2010 11:53 AM, William Dunlap wrote:
> >> > -----Original Message-----
> >> > From: r-help-bounces at r-project.org >
> >> [mailto:r-help-bounces at r-project.org] On Behalf Of John Sorkin
> >> > Sent: Tuesday, March 02, 2010 3:46 AM
> >> > To: Karl Ove Hufthammer; r-help at stat.math.ethz.ch
> >> > Subject: Re: [R] two questions for R beginners
> >> > > Please take what follows not as an ad hominem statement, but >
> >> rather as an attempt to improve what is already an excellent >
> >> program, that has been built as a result of many, many hours > of
> >> dedicated work by many, many unpaid, unsung volunteers.
> >> > > It troubles me a bit that when a confusing aspect of R is >
> >> pointed out the response is not to try to improve the > 
> language so as
> >> to avoid the confusion, but rather to state > that the confusion is
> >> inherent in the language. I understand > that to make changes that
> >> would avoid the confusing aspect of > the language that has been
> >> discussed in this thread would > take time and effort by 
> an R wizard
> >> (which I am not), time > and effort that would not be 
> compensated in
> >> the traditional > sense. This does not mean that we should not
> >> acknowledge the > confusion. If we what R to be the de facto lingua
> >> franca of > statistical analysis doesn't it make sense to 
> strive for >
> >> syntax that is as straight forward and consistent as possible?
> >> Whenever one changes the language that way old code
> >> will break.
> > I think in this case not much code would break. Mostly when 
> people have
> > a matrix M and ask for M$column they'll get an error; the 
> proposal is
> > that they'll get the requested column. (It is possible to 
> have a list
> > with names that is also a matrix with dimnames, but I think 
> that is a
> > pretty unusual construction.) But I haven't been convinced that the
> > proposal is a net improvement to the language.
> > Duncan Murdoch
> >
> >> The developers can, with a lot of effort,
> >> fix their own code, and perhaps even user-written code
> >> on CRAN, but code that thousands of users have written
> >> will break. There is a lot of code out there that was
> >> written by trial and error and by folks who no longer
> >> work at an institution: the code works but no one knows
> >> exactly why it works. Telling folks they need to change
> >> that code because we have a cleaner but different syntax
> >> now is not good. Why would one spend time writing a
> >> package that might stop working when R is "upgraded"?
> >>
> >> I think the solution is not to change current semantics
> >> but to write functions that behave better and encourage
> >> users to use them, gradually abandoning the old constructs.
> >>
> >> Bill Dunlap
> >> Spotfire, TIBCO Software
> >> wdunlap tibco.com
> >> > > Again, please understand that my comment is made with deepest >
> >> respect for the many people who have unselfishly 
> contributed > to the
> >> R project. Many thanks to each and every one of you.
> >> > > John
> >> > > > >>> Karl Ove Hufthammer <karl at huftis.org> 3/2/2010 
> 4:00 AM >>>
> >> > On Mon, 01 Mar 2010 10:00:07 -0500 Duncan Murdoch >
> >> <murdoch at stats.uwo.ca> > wrote:
> >> > > Suppose X is a dataframe or a matrix. What would you > 
> expect to
> >> get from > > X[1]? What about as.vector(X), or as.numeric(X)?
> >> > > All this of course depends on type of object one is 
> speaking > of.
> >> There > are plenty of surprises available, and it's best 
> to use the >
> >> most logical > way of extracting. E.g., to extract the top-left
> >> element of a 2D > structure (data frame or matrix), use 'X[1,1]'.
> >> > > Luckily, R provides some shortcuts. For example, you 
> can > write
> >> 'X[2,3]' > on a data frame, just as if it was a matrix, even though
> >> the > underlying > structure is completely different. (This doesn't
> >> work on a > normal list; > there you have to type the 
> whole 'X[[2]][3]'.)
> >> > > The behaviour of the 'as.' functions may sometimes be 
> surprising,
> >> at > least for me. For example, 'as.data.frame' on a named vector
> >> gives a > single-column data frame, instead of a 
> single-row data frame.
> >> > > (I'm not sure what's the recommended way of converting 
> a > named
> >> vector to > row data frame, but 'as.data.frame(t(X))' works, even
> >> though both 'X' > and 't(X)' looks like a row of numbers.)
> >> > > > The point is that a dataframe is a list, and a 
> matrix > isn't.
> >> If users > > don't understand that, then they'll be confused
> >> somewhere. Making > > matrices more list-like in one 
> respect will just
> >> move the confusion > > elsewhere. The solution is to understand the
> >> difference.
> >> > > My main problem is not understanding the difference, which is >
> >> easy, but > knowing which type of I have when I get the output a
> >> function in a > package. If I know the object is a named 
> vector or a
> >> matrix > with column > names, it's easy enough to type
> >> 'X[,"colname"]', and if it's a data > frame one may use 
> the shortcut
> >> 'X$colname'.
> >> > > Usually, it *is* documented what the return value of a 
> > function
> >> is, but > just looking at the output is much faster, and *usually*
> >> gives the > correct answer.
> >> > > For example, 'mean' applied on a data frame gives a named >
> >> vector, not a > data frame, which is somewhat surprising 
> (given that
> >> the columns of a > data frame may be of different types, while the
> >> elements of a > vector may > not). (And yes, I know that it's
> >> *documented* that it returns a named > vector.) On the other hand,
> >> perhaps it is surprising that > 'mean' works > on data 
> frames at all. :-)
> >> > > -- > Karl Ove Hufthammer
> >> > > ______________________________________________
> >> > R-help at r-project.org mailing list
> >> > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the
> >> posting guide > http://www.R-project.org/posting-guide.html > and
> >> provide commented, minimal, self-contained, reproducible code.
> >> > > Confidentiality Statement:
> >> > This email message, including any attachments, is for >
> >> th...{{dropped:6}}
> >> > > ______________________________________________
> >> > R-help at r-project.org mailing list
> >> > https://stat.ethz.ch/mailman/listinfo/r-help
> >> > PLEASE do read the posting guide >
> >> http://www.R-project.org/posting-guide.html
> >> > and provide commented, minimal, self-contained, 
> reproducible code.
> >> >
> >> ______________________________________________
> >> R-help at r-project.org mailing list
> >> https://stat.ethz.ch/mailman/listinfo/r-help
> >> PLEASE do read the posting guide
> >> http://www.R-project.org/posting-guide.html
> >> and provide commented, minimal, self-contained, reproducible code.
> >>
> >
> > ______________________________________________
> > R-help at r-project.org mailing list
> > https://stat.ethz.ch/mailman/listinfo/r-help
> > PLEASE do read the posting guide
> > http://www.R-project.org/posting-guide.html
> > and provide commented, minimal, self-contained, reproducible code.
> >
> 
> -- 
> Patrick Burns
> pburns at pburns.seanet.com
> http://www.burns-stat.com
> (home of 'The R Inferno' and 'A Guide for the Unwilling S User')
> 
> ______________________________________________
> R-help at r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide 
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
> 